Posters P3, Monday
Reaction engineering, catalysis and kinetics
P3.1 Heterogeneous and autocatalytic dissolution reactions. From microscopic phenomena to macroscopic models for dissolvers. *F. Charlier, D. Canion, S. Lalleman, A. Magnaldo, G. Borda, E. Schaer1 (CEA, Bagnols-sur-Ceze, FR; 1Univ. Lorraine, Nancy, FR) [22]
P3.2 Benzaldehyde hydrogenation over cobalt oxide supported on silica oxide. Effect of catalyst preparation method. I. Lounas, H. Zazoua1, *A. Saadi, C. Rabia (USTHB, Algier-Bab Ezzouar, DZ; 1CRAPC Res. Cent, Bou Ismail, Tipaza, DZ) [77]
P3.3 Catalytic hydrogenation of D-xylose over Ru decorated carbon foam catalyst in SpinChem rotating bed reactor. *T. N. Pham, A. Samikannu, A.-R. Rautio1, L. J. Koppany2, Z. Konya2, J. Wärnå3, K. Kordas2, J.-P. Mikkola3 (Umea Univ., SE; 1Univ. Oulu, FI; 2Univ. Szeged, HU; 3Abo Akad. Univ., Turku, FI) [88]
P3.4 Effect of the space time in 1-butene oligomerisation over a ZSM-5 zeolite catalyst. *M. Diaz, A. Ateka, E. Epelde, P. Perez-Uriarte, J. Bilbao, A. T. Aguayo (Univ. Pais Vasco, Bilbao, ES) [134]
P3.5 Hydrodeoxygenation of vegetable oil using microscale-based reactor. *Y. Sa-ngasaeng, S. Jongpatiwut, N. Sirimungkalakul1 (Chulalongkorn Univ., Bangkok, TH; 1PTT Publ. Co. Ltd, Ayutthaya, TH) [165]
P3.6 Improved p-xylene selectivity on the conversion of light paraffins to aromatics using modified HZSM-5 catalysts. *T. Chuntachat, S. Jongpatiwut1, T. Rirksomboon1, B. Kitiyanan1 (Chulalongkorn Univ., Bangkok, TH; 1Cent. Petrol. Petrochem. Adv. Mat., Chulalongkorn Univ., Bangkok, TH) [171]
P3.7 Influence of alloying components salts on the catalytic hydrolysis kinetics of tetraethoxysilane in production of high purity silicate materials. *A. Bessarabov, A. Kvasyuk, V. Trokhin, A. Vendilo (R&D Cent. Fine Chemicals, Moskva, RU) [177]
P3.8 Influence of presence of heavy metals on the kinetics of pyrolysis of almond shell. *A. Ronda, M. Calero, G. Blázquez, A. Pérez, A. Martín-Lara (Univ. Granada, ES) [178]
P3.9 Kinetic analysis of the oil shale pyrolysis using thermogravimetry and differential scanning calorimetry. *J. P. Foltin, A. C. L. Lisbôa, G. N. Prado (UNICAMP, Campinas, BR) [186]
P3.10 Kinetic modelling of the photo-Fenton reaction and parameter fitting: a comparative study. *C. Jiménez-Moreno, F. Audino, M. Graells (Univ. Politec. Catalunya, Barcelona, ES) [187]
P3.11 Magnetically recoverable catalysts for cellulose hydrogenolysis. O. V. Manaenkov, L. M. Bronstein1, *V. G. Matveeva, O. V. Kislitza, E. M. Sulman, A. I. Sidorov, V. Y. Doluda (Tver State Tech. Univ., RU; 1Indiana Univ., Bloomington IN, US) [193]
P3.12 Methylation of toluene with methanol using modified HZSM-5 catalysts: effects of desilication and silylation. *N. Peaunbida, T. Rirksomboon1 (Petrol. Petrochem. Coll., Bangkok, TH; 1Cent. Petrol. Petrochem. Adv. Mat., Chulalongkorn Univ., Bangkok, TH) [200]
P3.13 Photocatalytic degradation of acid orange 7 by NiO/TiO2 and ZnO/TiO2 and their energy storage capacity. *C. Wongburapachart, P. Rangsunvigit, P. Ngaotrakanwiwat1 (Petrol. Petrochem. Coll., Bangkok, TH; 1Burapha Univ., Chonburi, TH) [228]
P3.14 Production of biojet fuels from palm oil using Pt/HYcore-Pd/TiO2shell catalyst prepared by atomic layer deposition. *W. Yenying, S. Jongpatiwut1 (Petrol. Petrochem. Coll., Bangkok, TH; 1Cent. Petrol. Petrochem. Adv. Mat., Chulalongkorn Univ., Bangkok, TH) [242]
P3.15 Synthesis and electrochemical evaluation of nano platinum supported on carbon vulcan as PEM fuel cell anode catalyst. S. Kheradmandinia, N. Khandan, *M. H. Ekani (IROST, Tehran, IR) [287]
P3.16 TBR CFD simulation of HDS process incorporating interface momentum exchange models, and shape and the pellet porous microstructure effects. *M. E. Cordero, L. G. Zárate, R. Natividad1, J. S. Uribe, M. Villegas, J. A. Hernandez-Servin1 (Univ. Aut. Puebla, MX; 1UAEM-UNAM. Toluca, MX) [288]
P3.17 Hydrogen production from microwave pyrolysis of spruce sawdust with char and char-doped metallic catalysts. *P. Lestinsky, B. Grycova, A. Pryszcz (Tech. Univ., Ostrava, CZ) [334]
P3.18 Investigation of the influence of fuel characteristics and design on pulverized fuel combustion in multifuel swirl burners. *B. S. Repic, D. M. Djurovic, A. D. Marinkovic, A. M. Eric, G. S. Živkovic (Inst. Nucl. Sci. Vinča, Beograd, RS) [339]
P3.19 SAPO-18 and SAPO-34 catalysts for the transformation of dimethyl ether to olefins (DTO process). P. Perez-Uriarte, *M. Diaz, A. Ateka, M. Gamero, A. T. Aguayo, J. Bilbao (Univ. Pais Vasco, Bilbao, ES) [359]
P3.20 Etherification of furfuryl alcohol to butyl levulinate over ion-exchange resins, an oxygenate of second generation. J. Massanet, R. Bringué, E. Ramirez, M. Iborra, J. Tejero, *R. Soto (Univ. Barcelona, ES) [386]
P3.21 Experimental liquid− and gas−phase study on adsorption of C1-C4 alcohols, C4-C5 isoolefins and their corresponding ethers over AmberlystTM 35. *R. Soto, N. Oktar1, C. Fité, E. Ramirez, R. Bringué, J. Tejero (Univ. Barcelona, ES; 1Gazi Univ., Ankara, TR) [387]
P3.22 Kinetics of the hydrogenation of 2-methyl-3-butyn-2-ol over a structured palladium-based catalyst. *S. Vernuccio, P. Rudolf von Rohr (ETH, Zurich, CH) [391]
P3.23 Kinetics of the liquid-phase syntheses of propyl tert-butyl ether (PTBE) and butyl tert-butyl ether (BTBE) over AmberlystTM 35. J. H. Badia, R. Bringué, C. Fité, M. Iborra, *R. Soto, F. Cunill (Univ. Barcelona, ES) [392]
P3.24 Heterogeneous catalyst study in copolymerization reactions, among propylene oxide and carbon dioxide in subcritical conditions. *M. Pinilla de Dios, S. Perez Nogal, K. Ëranen1, T. Salmi1, J. Garcia Serna (Univ. Valladolid, ES; 1Abo Akad. Univ., Turku, FI) [451]
P3.25 Oxidative conversion of light alkanes to oxygenates. *S. A. Tungatarova, T. S. Baizhumanova, Z. T. Zheksenbaeva, K. Kassymkan, M. Zhumabek (Inst. Fuel Catal. Electrochem., Almaty, KZ) [479]
P3.26 Modelling an integrated Resid Fluid Catalytic Cracking unit with a secondary riser. *M. A. Rakib, M. Karakaya, S. U. Basheer, G. Singaravel, A. Taher, M. Al Musharfy, S. Spatenka1, J. Aguerrevere1 (Takreer Res. Cent., Abu Dhabi, AE; 1Process Systems Enterprise Ltd., London, UK) [522]
P3.27 Development of composite materials by combustion synthesis for catalytic methane reforming into hydrocarbons and synthesis-gas. G. Xanthopoulou, K. Karanasios, *S. A. Tungatarova1, T. S. Baizhumanova1, Z. T. Zheksenbaeva1, M. Zhumabek1, G. Vekinis (Nat. Cent. Sci. Res. Demokritos, Athens, GR; 1Inst. Fuel Catal. Electrochem., Almaty, KZ) [598]
P3.28 Supported heteropoly acid catalysts of oxidative conversion of alkanes. *S. A. Tungatarova, T. S. Baizhumanova, M. Zhumabek, I. S. Chanysheva, A. V. Shapovalov, V. P. Grigoriyeva (Inst. Fuel Catal. Electrochem., Almaty, KZ) [612]
P3.29 Comparison of CZA/S, CZZr/S and CZMn/S bifunctional catalysts for the syngas to dimethyl ether process. *A. Ateka, P. Perez-Uriarte, M. Sánchez-Contador, I. Sierra, J. Ereña, A. T. Aguayo, J. Bilbao (Univ. Pais Vasco, Bilbao, ES) [661]
P3.30 Effect of operating conditions on the one-step DME synthesis from H2+CO+CO2 mixtures over a CZMn/S catalyst. *A. Ateka, M. Sánchez-Contador, P. Rodriguez-Vega, I. Sierra, J. Ereña, A. T. Aguayo, J. Bilbao (Univ. Pais Vasco, Bilbao, ES) [663]
P3.31 Erbium-exchanged ZSM-5 catalysed conversion of cellulose to lactic acid. D. Li, Z.-L. Li, F.-F. Wang, C. Liu, *W.-S. Dong (Shaanxi Normal Univ., Xi’an, CN) [689]
P3.32 Photocatalytic CO2 reduction by Cu loaded TiO2 in the twin photoreactor. B.-R. Chen, V.-H. Nguyen, *S. K.-Y. Lin, J. C. S. Wu, K. Kočí1 (Nat. Taiwan Univ., Taipei, TW; 1Tech. Univ., Ostrava, CZ) [741]
P3.33 Assessment of functional monomers for production of pressure-sensitive adhesives via emulsion copolymerization of methyl methacrylate and butyl acrylate. *N. B. Barbosa, M. M. Espinola-Colmán, V. Carranza-Oropeza, D. Chicoma-Lara1, R. Giudici (Univ. Sao Paulo, BR; 1Oswaldo Cruz Chem. Ind., BR) [747]
P3.34 Co3O4 supported on different supports for N2O decomposition. *A. Klyushina, K. Pacultová, K. Jirátová, L. Obalová (Tech. Univ., Ostrava, CZ) [751]
P3.35 Simulation study of Fischer-Tropsch reactor by combined structure with oxidative coupling of methane: increasing ethylne production. *A. Ghareghashi, F. Shahraki, K. Razzaghi, S. Ghader1, M. A. Torangi2 (Sistan Baluchistan Univ., Zahedan, IR; 1Univ. Kerman, IR; 2Univ. Golestan, Gorgan, IR) [836]
P3.36 Methanol-to-olefins : Conversion over tailor-made MFI-type zeolites. P. Losch, *B. Louis (Univ. Strasbourg, FR) [865]
P3.37 Sol-gel catalyst CuO/ZnO/Al2O3 applied in the steam reforming of methanol and in the water-gas shift reaction. T. C. Ferrari, R. Menechini Neto, J. L. C. W. Lourenco, *O. A. A. dos Santos, L. M. M. Jorge (State Univ. Maringa, BR) [876]
P3.38 The mechanism of oxidative conversion of cyclohexane on heterogeneous biomimetic catalyst. S. Aghamammadova, I. Nagieva1, L. Gasanova, *T. Nagiev1 (Inst. Catal. Inorg. Chem., Baku, AZ; 1Baku State Univ., AZ) [881]
P3.39 Low-coordinate sites on CuPt alloy nanoclusters on TiO2 for enhanced photocatalytic CO2 conversion. S. Lee, D.-H. Kim1, *D. C. Lee (Korea Adv. Inst. Chem. Technol., Daejon, KR; 1Chonnam Nat. Univ., Gwangju, KR) [891]
P3.40 Modeling of NO, CO and C3H6 catalytic oxidation activity depending on Pt sites oxidation state. A. Arvajová, *J. Březina, P. Kočí (Univ. Chem. Technol. Prague, Praha, CZ) [892]
P3.41 Porous structure of catalysed particulate filters and its effect on pressure loss. M. Václavík, *M. Leskovjan, V. Novák1, P. Kočí, D. Thompsett1 (Univ. Chem. Technol. Prague, Praha, CZ; 1Johnson Matthey Technology Centre, Reading, UK) [895]
P3.42 Synthesis and characterization of core- shell Ni-containing microspheres and activity test over methane dry reforming. *G. Gunduz Meric, L. Degirmenci (Bilecik Univ., TR) [899]
P3.43 Synthesis, characterization and catalytic activity of sulfonic acid functionalized silica. *D. Pečar, A. Goršek (Univ. Maribor, SI) [954]
P3.44 Transesterefication of waste oil using biocatalysts of lipase immovilized on pillared clay. *J. A. Colín-Luna, A. K. Medina-Mendoza, M. M. González-Brambila, H. Puebla-Núñez, C. R. Tapia-Medina, J. Ramirez-Muñoz (UAM-Azc., Tamaulipas, MX) [1043]
P3.45 Hydrogen production by steam reforming of acetic acid in the presence of Ni containing catalysts. B. Pekmezci, N. Cakiryilmaz, H. Arbag, *N. Oktar, G. Dogu, T. Dogu1 (Gazi Univ., Ankara, TR; 1Middle East Univ. Technol., Ankara, TR) [1074]
P3.46 Thermal stable titania nanotubes supported V2O5 for oxidative dehydrogenation of propane. M. Saei Moghaddam, *J. Towfighi, A. H. Shahbazi Kootenaei1, E. Goudarzi (Tarbiat Modarres Univ., Tehran, IR; 1Islamic Azad Univ., Mahshahr, IR) [1082]
P3.47 Effect of temperature on hydrodeoxygenation of raw bio-oil over an activated carbon-based catalyst. *R. Palos, T. Cordero-Lanzac, J. Rodríguez-Mirasol1, P. Castaño, T. Cordero1, J. Bilbao, J. M. Arandes (Univ. Pais Vasco, Bilbao, ES; 1Univ. Málaga, ES) [1103]
P3.48 Deep oxidation of ethanol over Co-Mn-Al mixed oxides supported on pelletized magnesia-alumina: role of acid-base properties. *K. Jirátová, J. Balabánová, F. Kovanda1, L. Obalová2 (Inst. Chem. Proc. Fundam., Praha, CZ; 1Univ. Chem. Technol. Prague, Praha, CZ; 2Tech. Univ., Ostrava, CZ) [1117]
P3.49 Modelling of the laboratory-scale packed bed reactor for partial gas-phase oxidation of alcohol using Au nanoparticles as the catalyst. *T. Kilpiö, E. Behravech, V. Russo1, T. Salmi (Abo Akad. Univ., Turku, FI; 1Univ. Napoli Federico II, IT) [1121]
P3.50 Temperature effect on OMW treatment by Photo-Fenton reaction. *G. Hodaifa, C. Agabo (Univ. Pais Vasco, Leioa, ES) [1139]
P3.51 Kinetic study of nitration a biofuel to synthesis of bio-additive fuels. *I. Ben Talouba, H. M. Vélez Reina, L. Balland, N. Mouhab (Univ. Rouen, Mont-Saint-Aignan, FR) [1161]
P3.52 Evaluation of the nonlinear frequency response method for the hydrolysis of acetic anhydride. *M. Felischak, D. Nikolic1, M. Petkovska1, C. Hamel2, A. Seidel-Morgenstern3 (Otto v. Guericke Univ., Magdeburg, DE; 1Univ. Belgrade, Beograd, RS; 2Anhalt Univ. Appl. Sci., Köthen, DE; 3Max-Planck-Inst., Magdeburg, DE) [1186]
P3.53 The conversion of fructose into lactic acid catalysed by La-modified phosphomolybdic acid. B.-W. Zhao, H. Li, *C. Liu, W.-S. Dong (Shaanxi Normal Univ., Xi’an, CN) [1175]
P3.54 The role of external mass transfer on corn stover saccharification: fractal kinetic modeling. *M. J. Wojtusik, M. Zurita1, J. C. Villar2, M. Ladero, F. Garcia-Ochoa (Univ. Complutense, Madrid, ES; 1Abengoa Res., Sevilla, ES; 2Productos Forestales, Madrid, ES) [1224]
P3.55 Optimization of isomerization activity and aromatization activity in catalytic naphtha reforming via reforming of MO over tri-metallic modified catalyst. *F. M. Elfghi, N. A. Amin (Coll. Eng., Nizwa, OM) [1230]
P3.56 Flow reactor study of hydrazine decomposition in sub- and supercritical water. *I. Svishchev, A. Plugatyr (Trent Univ., Peterborough, CA) [1238]
P3.57 High conversion of phenolic compounds in hydrodeoxygenation process over Ni-Mo nanoparticles supported on SBA-15. *R. W. D. Lima, T. L. R. Hewer, M. Schmal1, R. M. D. B. Alves (Univ. Sao Paulo, BR; 1UFRJ, Rio de Janeiro, BR) [1268]
P3.58 Synthesis of iron oxide nanoparticles and application for liquid phase catalytic oxidation of propanol. *D. Lokhat, M. Carsky (Univ. Kwazulu-Natal, Durban, ZA) [1289]
P3.59 Development of structured reactors for transformation of biomass components to high-value products. *V. Shumilov, K. Eränen, N. Kumar, D. Y. Murzin, T. Salmi (Abo Akad. Univ., Turku, FI) [1294]
P3.60 Energy storage key component ammonia borane: catalytic hydrolysis, and kinetic parameters. G. Özkan, T. Şimşek, D. Ö. Özgür, H. B. Murathan, M. S. Akkuş, *G. Özkan1 (Gazi Univ., Ankara, TR; 1Ankara Univ. , TR) [760]
P3.61 The effect of operating conditions and supports on Ni-Cu-Cs three metallic catalyst for steam reforming of ethanol to the production of hydrogen. G. Özkan, B. Şahbudak, *G. Özkan1 (Gazi Univ., Ankara, TR; 1Ankara Univ. , TR) [800]
Fluid flow and multiphase systems
P3.70 Hydrodynamic behaviour of an upward two-phase slug flow. *F. Saidj, A. Zeghloul, H. Bouyahiaoui, A. Azzi, B. J. Azzopardi1 (USTHB, Algier-Bab Ezzouar, DZ; 1Univ. Nottingham, UK) [23]
P3.71 Influence of aerators on heat transfer in multiphase contactors. *M. Žižka, R. Šulc, P. Ditl (Czech Tech. Univ., Praha, CZ) [1271]
P3.72 CFD simulation of the two phase flow ejector by Eulerian AUSM method. *M. Zolfaghari, S. Sadeghpour Galooyak1, B. Dabir (Amirkabir Univ. Technol., Tehran, IR; 1Res. Inst. Pet. Ind., Tehran, IR) [1251]
P3.73 Experimental investigation of single fluid particle breakage due to turbulence. *E. H. Herø, J. Solsvik, H. Knuutila, H. A. Jakobsen (Norweg. Univ. Sci. Technol., Trondheim, NO) [149]
P3.74 Experimental investigation of impeller position effect on nucleation kinetics of borax decahydrate in dual impeller cooling crystallizer. A. Kaćunić, *M. Ćosić, N. Kuzmanić (Univ. Split, HR) [1264]
P3.75 Unsteady flow inside reversing chamber. R. Klosowiak (Poznan Univ. Technol., PL) [1155]
P3.76 The flow of liquid around the bubbles generated from two nozzles. *P. Dzienis, D. Tomaszuk, W. Suchecki1, R. Mosdorf (Bialystok Univ. Technol., PL; 1Warsaw Univ. Technol., Plock, PL) [1260]
P3.77 Effect of liquid properties on interaction of a pair of rising bubbles – statistic evaluation. *M. Večeř, K. Wichterle (Tech. Univ., Ostrava, CZ) [851]
P3.78 Distribution of the flow turbulence behind sphere for different inflow turbulence. L. Bogusławski (Poznan Univ. Technol., PL) [1110]
P3.79 The role of near-wall drag effect on the dynamics of a tethered polymer under shear flow. G. Nir, E. Chetrite1, A. Vivante2, Y. Garini2, *R. Berkovich1 (Harvard Med. Sch., Boston MA, US; 1Ben-Gurion Univ. Negev, Beer-Sheva, IL; 2Bar Ilan Univ., Ramat Gan, IL) [1144]
P3.80 The role of ionic surfactants in electrophoretic addressing of oil-in-water droplets. *L. Vobecká, J. Tuček, Z. Slouka1, M. Přibyl1 (Univ. Chem. Technol. Prague, Praha, CZ; 1Univ. West Bohemia, Plzeň, CZ) [1056]
P3.81 Transient mass transfer from a spherical bubble in homogeneous shear liquid flow: A three-dimensional numerical simulation. *A. Saboni, S. Alexandrova, M. Karsheva1, C. Gourdon2 (Univ. Pau, FR; 1Univ. Chem. Technol. Metall., Sofia, BG; 2ENSIACET, Toulouse, FR) [735]
P3.82 Numerical model of microdroplet charging and oscillatory movement between electrodes. R. Flittner, M. Přibyl, *Z. Slouka (Univ. Chem. Technol. Prague, Praha, CZ) [1275]
P3.83 Mass transfer enhancement of liquid-liquid system by droplet deformation in a microfluidic expansion device. *X. Wang, T. Qiu (Fuzhou Univ., CN) [194]
P3.84 Evaluation of residence time distribution in millireactor with laminar flow: comparison of experiments, CFD and laminar flow model. *S. Hejda, T. Trávníčková, J. Havlica1, P. Stavárek, V. Staněk (Inst. Chem. Proc. Fundam., Praha, CZ; 1Purkinje Univ., Usti n/L, CZ) [1012]
P3.85 No adiabatic flow of fluid through the channel filled with metal foam. *M. Płaczek, R. Dyga, S. Witczak (Opole Univ. Technol., PL) [710]
P3.86 Void fraction predictive method in mini-channel two-phase flows. *M. Pietrzak, M. Płaczek, R. Dyga (Opole Univ. Technol., PL) [552]
P3.87 Experimental determination and estimation of the pressure drop through the column, gas holdup and bed expansion in Type II-TBC. *B. Bensebia, F. Bentahar1, O. Bensebia1 (Univ. Hassiba B. Bouali, Chlef, DZ; 1USTHB, Algier-Bab Ezzouar, DZ) [721]
P3.88 Characteristics of coal fluidised bed. *R. Klosowiak, J. Bartoszewicz, R. Urbaniak (Poznan Univ. Technol., PL) [1187]
P3.89 Effect of particle cluster size on flow, heat transfer behavior and the reaction process in FCC riser. *M. Wang, L. Lv, N. He, X. Lan, J. Gao (China Univ. Petrol., Beijing, CN) [328]
P3.90 Assessment of permeability of coal chars under conditions of multi directional flow of gas. G. Wałowski, *G. Filipczak1, E. Krause2 (Inst. Technol. Life Sci., Poznań, PL; 1Opole Univ. Technol., PL; 2Cent. Min. Inst., Mikołow, PL) [1130]
P3.91 Cycle times study off different solids in draft tube conical spouted beds. I. Estiati, *M. Tellabide, H. Altzibar, M. Olazar (Univ. Pais Vasco, Bilbao, ES) [752]
P3.92 3D DEM simulation of coal gasification in gas-solid bubbling bed. *Y. Wu, L. Peng, X. Lan, J. Gao (China Univ. Petrol., Beijing, CN) [34]
P3.93 Modeling and optimization of biomass combustion process. *D. M. Djurovic, B. S. Repic, D. V. Dakic1, A. D. Marinkovic, M. J. Paprika (Inst. Nucl. Sci. Vinča, Beograd, RS; 1Fac. Mech. Eng., Beograd, RS) [1111]
P3.94 Numerical simulation on gas-solid flow and mass transfer in FCC packing strippers. *Y. Wang, G. Zhao, W. Su, X. Lan, J. Gao (China Univ. Petrol., Beijing, CN) [346]
P3.95 CFD simulation on the influence of particle clusters and bubbles in FCC regenerator. *N. He, Y. Wu, M. Wang, X. Lan, J. Gao (China Univ. Petrol., Beijing, CN) [321]
P3.96 Electrospraying: mathematical modelling of nanoparticle deposition. A. Zítková, *M. Kroupa, J. Kosek (Univ. Chem. Technol. Prague, Praha, CZ) [890]
P3.97 Experimental investigation of the breakup of spiral-nozzle-produced liquid curtain for absorption processes. *O. Krištof, T. Svěrák, P. Kejík, P. Bulejko, K. Mayerová, J. Kalivoda (Brno Univ. Technol., CZ) [1214]
P3.98 Static vortex contactor for intensification of interphase processes between liquids. *A. O. Kuzmin, M. K. Pravdina1 (Boreskov Inst. Catal., Novosibirsk, RU; 1Inst. Thermophys., Novosibirsk, RU) [1281]
P3.99 Comparison of two high pressure emulsification processes; high pressure jet and microfluidizer. S. Sadeghpour Galooyak, *M. Zolfaghari1, N. Fatourehchi2 (Res. Inst. Pet. Ind., Tehran, IR; 1Amirkabir Univ. Technol., Tehran, IR; 2Islamic Azad Univ., Tehran, IR) [1252]
P3.100 Water-in-oil emulsion formation for preventing wax deposition of heavy crude oil through pipeline. *K. Kruethong, A. Chareonsang, U. Suriyapraphadilok, D. A. Sabatini1 (Petrol. Petrochem. Coll., Bangkok, TH; 1Univ. Oklahoma, Norman OK, US) [312]
P3.101 The modifications of the rheological behaviour of Na-bentonite suspensions with chitosan biopolymer effect. *B. Abu-Jdayil, K. B. Alsayyed Ahmed, M. Djama, M. Ghannam (UAE Univ., Al-Ain, AE) [801]
P3.102 Study of the factors which control the behavior of suspensions of the activated bentonite. Case study of Meghnia’s commercial product- Algéria. M. A. Bekghoul, *K. Deramchi, M. Ould Hamou, E. A. Moussaoui, B. Bourbala, D. Benkaci, S. Boutria, S. Bentaalla (ENP, El Harrach, DZ) [795]
P3.103 Evaluation of produced water pipes mineralogical scaling in a central Tunisian oilfield. *S. Barbouchi, L. Monser1 (ETAP, Tunis, TN; 1INSAT, Tunis, TN) [1131]
P3.104 Characterization of paraffin from different Tunisian crude oils. *M. Samcha, A. Boukadi (ETAP, Charguia, TN) [999]
P3.105 Flow assurance of a Libyan waxy crude oil. F. Mohamed, H. Benkreira1, S. Al-hengari, R. Patel1, *M. Elbousiffi (Libyan Petrol. Inst., Tripoli, LY; 1Univ. Bradford, UK) [691]
P3.106 The alternative solution for the pipeline transport of heavy crude using the heaters in pumping stations. *A. Benmounah, A. Chebouba (Univ. M’Hamed Bougara, Boumerdes, DZ) [56]
Particulate solids
P3.112 An electrochemical technique to measure the degree of dispersion of solid particles in aqueous medium. A. De la Concha, C. Haro Pérez, A. Alonso, J. Ramirez-Muñoz, *G. Martinez de Jesus (Univ. Aut. Metrop., Ascapotzalco, MX) [402]
P3.113 Analysis of effect of particle density on mixing behaviour in a rotating drum by DEM. *M. Yamamoto, S. Ishihara1, J. Kano1 (Sumimoto Bakelite Ltd., Fujieda, JP; 1Tohoku Univ., Sendai, JP) [843]
P3.114 Assessment of floc morphology and operating conditions interactions of a pilot-scale activated sludge process using image analysis technique. P. Oliveira, C. Saudejaud, M. Alliet, *C. Frances (CNRS, Toulouse, FR) [1256]
P3.115 Caspase-3 siRNA functionalized poly(butylcyanoacrylate) nanocarrier for anti-apoptosis in brain. *X. W. Zhang, W. Hintz, P. Henrich-Noack, J. Tomas, B. Sabel (Otto v. Guericke Univ., Magdeburg, DE) [412]
P3.116 Effect of activated carbons particle size and surface chemistry on the slow release of urea. M. Galhetas, S. Ventura1, W. Souza, A. P. Carvalho1, *M. A. G. Figueiredo (UERJ, Rio de Janeiro , BR; 1Univ. Lisboa, PT) [128]
P3.117 Effect of synthesis process parameters on stoichiometric hydroxyapatite properties. B. Galey, M. Tourbin, P. Gras, N. Abi Chebel, N. Rouquet1, F. Brouillet, D. Grossin, *C. Frances (CNRS, Toulouse, FR; 1URODELIA Co., Saint-Lys, FR) [1257]
P3.118 Experimental characterization of electrostatic charging of polymer powders. *S. Jantač, L. Konopka, J. Kosek (Univ. Chem. Technol. Prague, Praha, CZ) [1013]
P3.119 Characterization of banana waste (pseudo stem and leaves) by thermogravimetric analysis for potential use as biofuel. *J. F. Saldarriaga, I. Estiati1, A. Atxutegi1, A. Aristizabal, R. Aguado1, M. Olazar1 (Univ. Medellín, CO; 1Univ. Pais Vasco, Bilbao, ES) [1270]
P3.120 Modelling and simulation for elastic-plastic materials using ADEM. *S. Ishihara, J. Kano (Tohoku Univ., Sendai, JP) [343]
P3.121 Natural–calcium based residues for carbon dioxide capture. N. Chalermwat, R. Rattanaprapanporn, B. Chalermsinsuwan, *S. Poompradub (Chulalongkorn Univ., Bangkok, TH) [1093]
P3.122 Numerical investigation of agitated beds homogenization in dependence on bed depth via DEM. T. Barczi, T. Trávníčková1, *M. Kohout, J. Havlica2 (Univ. Chem. Technol. Prague, Praha, CZ; 1Inst. Chem. Proc. Fundam., Praha, CZ; 2Purkinje Univ., Usti n/L, CZ) [1020]
P3.123 On the use of natural limestone and dolomite for thermochemical energy storage of concentrated solar power. B. Sarrion, J. M. Valverde1, A. Perejon, L. A. Perez-Maqueda, P. E. Sanchez-Jimenez, *J. Perez-Vaquero1 (CSIC, Sevilla, ES; 1Univ. Sevilla, ES) [1122]
P3.124 Preparation of Pickering emulsion stabilized by stearate microparticles. *N. Higashide, K. Naoe, N. Matsuda1, M. Imai2 (Nara Coll., JP; 1Taihei Chem. Ind., Nara, JP; 2Nihon Univ., Fujisawa, JP) [235]
P3.125 Production and characterisation of superparamagnetic magnetite nanoparticles using a continuous co-precipitation process in a T-mixing system. *W. Hintz, M. K. Khalid, J. Tomas (Otto v. Guericke Univ., Magdeburg, DE) [356]
P3.126 Production and characterization of fluorescent polybutylcyanoacrylate nanoparticles to investigate the transport mechanisms of the blood-brain-barrier. *T. Hopf, Y. Qing, W. Hintz, P. Henrich-Noack, J. Tomas, B. Sabel (Otto v. Guericke Univ., Magdeburg, DE) [241]
P3.127 Relaxation of polymers and polymers emulsion using method TD-NMR. *P. Schneider, T. Chaloupka, J. Kosek (Univ. Chem. Technol. Prague, Praha, CZ) [1000]
P3.128 Segregation of fine sands in a conical spouted bed. *A. Pablos, J. Vicente1, J. Izquierdo, M. Olazar, R. Aguado (Univ. Pais Vasco, Bilbao, ES; 1Novattia Desarrollos, ES) [1247]
P3.129 Selective surface-modification in main-chain polymer-metal complex nanocrystals. R. Suzuki, T. Onodera, *H. Kasai, H. Oikawa (Tohoku Univ., Sendai, JP) [928]
P3.130 DEM simulation of powder caking process under humid conditions. H. Tavares, M. Guessasma, *Z. Afrassiabian1, M. Leturia1, K. Saleh1 (Univ. Picardie J. Verne, FR; 1Univ. Technol., Compiegne, FR) [1290]
Pharmaceutical engineering
P3.134 Stealth pHPMA-modified nanocarriers for antibody-targeted drug delivery systems. *D. Lizonova, J. Hanus, J. Hasa, V. Kral1, M. Pechar2, R. Pola2, F. Stepanek (Univ. Chem. Technol. Prague, Praha, CZ; 1Inst. Molec. Genetics, Praha, CZ; 2Inst. Macromol. Chem., Praha, CZ) [877]
Symposium on supercritical fluid applications
P3.137 Hydrothermal degradation of rutin in subcritical water: Effect of reaction temperature and analysis of degradation products. M. Ravber, Ž. Knez, *M. Škerget (Univ. Maribor, SI) [335]
P3.138 Supercritical fluid extraction of eucalyptus volatile oil in view of thermodynamic modelling. *H. Sovová, R. P. Stateva1, M. Topiař (Inst. Chem. Proc. Fundam., Praha, CZ; 1Inst. Chem. Eng., Sofia, BG) [283]
P3.139 Composition and antioxidant activity of pumpkin seeds grown in different production systems. T. Perko, *M. Škerget, M. Knez Hrnčič, Ž. Knez, M. Jakop1, F. Bavec1 (Univ. Maribor, SI; 1Univ. Maribor, Hoče, SI) [324]
P3.140 Extraction of glycyrrhetinic acid from licorice (Glycyrrhiza uralensis) using organic solvents and supercritical carbon dioxide with additive water. *Y. Saotome, M. Imai (Nihon Univ., Fujisawa, JP) [331]
P3.141 Supercritical CO2 extraction of bioactive triterpenes from rosemary leaves: kinetics and modeling. *O. Bensebia, B. Bensebia1, K. Allia, D. Barth2 (USTHB, Algier-Bab Ezzouar, DZ; 1Univ. Hassiba B. Bouali, Chlef, DZ; 2Univ. Lorraine, Nancy, FR) [730]
P3.142 Supercritical CO2 fractionation of sage leaves. *O. Bensebia, B. Bensebia1, K. Allia, D. Barth2 (USTHB, Algier-Bab Ezzouar, DZ; 1Univ. Hassiba B. Bouali, Chlef, DZ; 2Univ. Lorraine, Nancy, FR) [731]
P3.143 Creation of new functional materials: "Aerogel - CNTs" for the use as supercapacitors. P. Tsygankov, I. Khudeev, A. Tyrtyshnikov, *E. Vorobeva, S. I. Ivanov, N. Menshutina (Mendeleev Univ. Chem. Technol. Russia, Moskva, RU) [422]
P3.144 Use of supercritical carbon dioxide for direct preparation of crystalline monolithic TiO2 aerogels. M. Cerhová, *M. Sajfrtová, L. Matějová1, V. Dřínek, S. Daniš2, V. Jandová (Inst. Chem. Proc. Fundam., Praha, CZ; 1Tech. Univ., Ostrava, CZ; 2Charles Univ., Praha, CZ) [1284]
P3.145 Preparation of microcellular polystyrene foams with supercritical CO2 and co-solvent. *M. Topiař, A. Nistor1, D. de Masi1, J. Kosek1 (Inst. Chem. Proc. Fundam., Praha, CZ; 1Univ. Chem. Technol. Prague, Praha, CZ) [896]
P3.146 Incorporation of natural compounds in biopolymers by supercritical impregnation for active food packaging. *A. Torres, E. Ilabaca, A. Rojas, C. Villegas, J. Romero, F. Rodriguez, A. Guarda, M. J. Galotto (Univ. Santiago de Chile, CL) [918]
Chemical engineering education
P3.150 Self-training module and serious game for a flipped classroom about liquid-liquid extraction for future engineers in lifelong learning. M. Debacq (Cnam-GPIP, Paris, FR) [266]
Next page
Previous page
Author index
Scientific program - table of contents
